|
Intusoft's ICAP/4
product family provides advanced technology for power electronic design,
simulation, verification and test of analog and mixed-signal circuitry.
Within the full-featured "SpiceNet" design entry system, 30
ready-to-use SMPS schematic templates save design time, plus feature embedded
ICs, fast average models and passive devices with second-order effects.
A dedicated power component library adds an extra 900+ devices within
the simulation library. Hysteretic average models simulate devices up
to two orders of magnitude faster than switch models, while delivering
high accuracy. Also provided are special injection models derived from
Dr. Middlebrook's legendary General Feedback Theorem, for measuring open
loop properties while preserving closed-loop bias conditions. Special
IsSpice4 simulation algorithms invented by Intusoft, e.g., VSECTOL and
ICSTEP, enable tough convergence on complex switching circuitry. Other
features include an magnetics design and synthesis option, free custom
modeling service, model building tools and a gamut of verification analyses
such as Monte Carlo, worst case and extreme value.
Basic ICAP/4 Power
Electronic Solution
The ICAP/4Rx Power
Deluxe is a complete power electronic design-simulation solution that
provides design entry, analog & mixed-signal simulation, debugging
tools, 15,600+ simulation part models (no GFT models), model building
tool, waveform viewing and 125 waveform processing functions for electronic
designs that do not require advanced verification. Operating point information
can be viewed directly on the schematic and new models can be imported
and attached to a graphic shape for simulation.
More Advanced ICAP/4
Power Electronic Solution
ICAP/4Windows Power
Deluxe adds advanced verification analyses, such as Monte Carlo, worst
case, extreme value and root-summed squares parametric variation on power
electronic designs. It also includes AC/DC & transient sensitivity
analysis, noise and distortion analyses, plus interactive parametric variation
and nested component sweeping. A full set of electrical measurements can
be specified across the design, which is numerically charted after simulation,
including pass/fail histogram and component stress alarms. The package
furnishes 21,800+ simulation models, model building tools and library
management tools.
Power Supply Designer adds a complete magnetic design and synthesis tool
for the creation of inductors, transformers, coils, etc. The program predicts
magnetizing and leakage inductance, inter-winding capacitance, peak flux
density, DC and AC winding resistance, copper loss, core loss, weight,
temperature rise, window fill percentage and more. It also accommodates
change to 20+ design parameters such as temperature rise, window fill,
number of turns, wire gauge and type, bobbin margins, number of parallel
strands, gap length, layer insulation thickness,
wrapper thickness and end margin lengths.
Complete
ICAP/4 product comparison chart
|
